 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MN101E04G Type ROM (x 16-bit) x x RAM (x 16-bit) Package Minimum Instruction Execution Time Interrupts MN101E04G 128 K 4K QFP084-P-1818E *Lead-free 100 ns (at 3.135 V to 3.465 V, normal-mode) External (5 lines) Internal (13 lines) : Timer x 4, A/D x 1, RESET x 1, OSD x 1, Serial x 2, I2C x 1, Caption x 1, Remote control x 1, HSYNCx 1, VSYNCx 1 8-bit timer x 4 Watchdog timer: Time-out period is selectable. Timer Counter Serial Interface Caption/Teletext Decoder I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O I2C x 1: for multimaster mode, bus line (output) has 2 systems Sync serial / UART x 1 * Built-in sync separator x 1 30 * Common use 10-bit x 8-ch. (with S/H) 8-bit x 4-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters, splits) Remote control input discriminant circuit built-in, build-in NTSC/PAL/SECAM video signal processing circuit, built-in 3-line comb filter (NTSC) built-in adaptive 2-line comb filter (PAL) MAD00042CEM MN101E04G Pin Assignment P07,ADIN7,VDAF P06,ADIN6,HDAF VDD(VPP)*2 P05,ADIN5 P04,ADIN4 P03,ADIN3 P02,ADIN2 P01,ADIN1 P00,ADIN0 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 SCOMP MMOD DVDD AVDD SIREF BOUT DVSS AVSS OSC2 OSC1 VCOI PDO P10,RMIN,IRQ0 *1 P11,SDA0 *1 P12,SCL0 *1 P13,PWM P14,VOUT0 P15,SBT0 P16,SBD0 P17,SBO0 *1 P20,SDA1 *1 P21,SCL1 *1 P22,PWM0 P23,PWM1 P24,PWM2 DVDD DVSS P25,SYSCLK *1 P26,TM0IO *1 P27,TM1IO P30,NRST P31,IRQ1 P32,IRQ2 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 42 41 40 39 38 37 36 35 34 33 GOUT ROUT VIREF VCOMP VMOUT AVDD FBPIN AVSS EW VOUT AVDD FSCOUT FSCIN FPCO AVSS FVCOI HOUT HDOWN EHTIN BEAMIN ABLIN MN101E04G 32 31 30 29 28 27 26 25 24 23 22 10 11 12 13 14 15 16 17 18 19 20 AVDD P36,PWM4 VREFH VREFL CLL P33,IRQ3 P34,IRQ4 VSYNC PIPYIN PIPVIN PIPUIN VREFM MCOMPIN MSCIN CREFH QFP084-P-1818E *Lead-free *1: 5V dielectric Nch open drain output pin *2: Mask ROM=VDD, Flash Memory built-in type=VPP Support Tool In-circuit Emulator Flash Memory Built-in Type PX-PAC101E02-4W9J Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101EF04G [ES (Engineering Sample) available] 128 K 4K 100 ns QFP084-P-1818E *Lead-free MAD00042CEM CREFL AVSS MVIN CLH PIPYS MUIN 21 1 2 3 4 5 6 7 8 9 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP |
Price & Availability of MN101E04G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |